The LIPS 100 is a highly accurate durable and low cost in-cylinder
inductive transducer. Intrinsically Safe sensors for Hazardous gas, dust and mining atmospheres available. The LIPS 100 housing is available M20, M18 or _ UNF thread
and can be in any stroke length up to 800mm. Various electrical options
are available see P100 product sheet.
The LIPS 101 is a stand alone unit designed
for mounting externally that is both easy to install and very robust.
The LIPS101 can be ordered in any stroke length
up to 800mm.
Spring return, rod end or body clamp mounting
Various electrical options are available see
P101 product sheet.
The LIPS 103 is a short body version of the
stand alone LIPS 101, for up to 50mm of linear
displacement.
Spring return available.
Various electrical options are available see
P103 product sheet.
The LIPS 106 has been designed for installation
in cylinders where internal length or diameter is limited. The electronic
interface of the LIPS 106 is mounted externally
in a separate housing. The LIPS 106 is supplied
in any stroke length up to 800mm.
Various electrical options are available see
P106 product sheet.
The LIPS 111 is extra rugged version of the
LIPS 101 with 1/2" target rod and M8 rod ends.
The LIPS 111 can be ordered in any stroke length up to 800mm. .
Various electrical options are available see
P111 product sheet.
The LIPS 112 is a durable, accurate and slimeline
guagehead linear position transducer for industrial and scientific
feedback applications. Sealed to IP67 and housed in a rugged stainless
steel body with spring loaded push rod.
Various electrical options are available see
P112 product sheet.
The LIPS 114 is waterproof version of the
LIPS 101 with IP68 sealing for continual submersion at 10bar (100msw, 150psi).
The LIPS 111 can be ordered in any stroke length up to 800mm. .
Various electrical options are available see S114 product sheet.
The LIPS 115 is extra rugged version of the
LIPS 114 with 1/2" target rod and M8 rod ends. It is IP68 sealed for continual submersion at 10bar (100msw, 150psi).
The LIPS 115 can be ordered in any stroke length up to 800mm. .
Various electrical options are available see S115 product sheet.
The LIPS 117 is a Slim-line version of the P101
with a 19mm dia. stainless steel body and up to 350 mm electrical
stroke..
Various electrical options are available see
P117 product sheet.
The LIPS 118 is a Slim-line sensor with a 19mm dia. stainless steel body and up to 50mm electrical
stroke..
Various electrical options are available see P118 product sheet.
The LIPS 125 is high pressure sealed version of the
LIPS 115 with sealing for continual submersion at 350bar (3500msw, 5000psi).
The LIPS 125 can be ordered in any stroke length up to 800mm. .
Various electrical options are available see S125 product sheet.
The LIPS 103 is a mid stroke version of the
stand alone LIPS 103 for 51-100mm of linear
displacement.
Spring return available.
Various electrical options are available see P133 product sheet.
The LIPS 138 is a mid stroke, slim-line sensor with a 19mm dia. stainless steel body and up to 100mm electrical
stroke..
Various electrical options are available see P138 product sheet.
We can supply any desired stroke within the ranges given
above.
Click here to find your
local distributor
| Home Page | Quality | Products | Part
Number Coding | Case Studies |
| Help Desk | Enquiries | Distributors | How to find us |
