P505 Slim-line Rotary Sensor


Position feedback for industrial and scientific applications
Available in any travel between 15° and 160°


The P505 RIPS® (Rotary Inductive Position Sensor) is a miniature, high accuuracy rotary position sensor designed for industrial, automotive and scientific feedback applications. Like all Positek sensors the P505 is supplied with the output calibrated to the angle specified by the customer, between 15 and 160 degrees.The electronics are all fully integrated, no external signal conditioning is required. The sensor provides a linear output proportional with angle of rotation. There is a small machined registration mark to identify the calibrated mid point.

The P505 is well suited to OEMs where good sensor performance and compact housing is important..
Overall performance, repeatability and stability are outstanding over a wide temperature range. The P505 has a anodised aluminium flange, stainless steel body and shaft for a long service life and excellent environmental resistance. The sensor is easy to install with flange or servo mounting options, it also offers a range of electrical options. Sealing is IP67 and full EMC protection built in.


Specification

Dimensions

 

Body Diameter

19mm

Body Length (to seal face)

45.4mm standard, 50.4mm buffered

Shaft

8.3mm, OD 4mm

 

For full mechanical details see drawing

Measurement range

Any angle from ±7.5° to ±80°

Independant Linearity

<±0.25% up to 100° @ 20°C
<±0.1% available on request

Temperature Coefficient

<±0.01%/°C Gain & <±0.01%FS/°C Offset

Output Characteristics

Resolution

Infinite

Noise

<0.02% FSO

Shaft Torque

<20mNm Static

Frequency Response

>10KHz (-3dB);

 

 

Output Signal and Output Load

Output Signal

Output Load

 

0.5 to 4.5 V dc ratiometric

5K Ohms min

 

0.5 to 4.5 V dc

5K Ohms min

 

0.5 to 9.5 V dc

5K Ohms min

Supply Current

10 mA Typical 20 mA max.

 

 

 

Temperature Limits

 

Operating

-40 to + 125°C (5V input only)

 

-20 to + 85°C

Storage

-40 to + 125°C

EMC Performance

 

Susceptibility

EN 61000-6-2

Radiated

EN 61000-6-3

 

 

Vibration

IEC 68-2-6: 10g

Shock

IEC 68-2-29: 40 g

MTBF

350,000 hrs 40°C Gf

Sealing

IP67

 

 

Electrical Connections

Screened 3 core cable or M8 4 pin connector

Detailed Dimensions

Refer to drawing below. Other options available.

Outline

Click for pdf
Request AutoCAD Drawing
Datasheet Click for pdf
Installation Sheet Click for pdf


Preferences

Positek offers a range of options for its standard sensors.
Each sensor is manufactured to suit each customer's preferences.
If your requirement is outside the options given below,
Positek can modify/ redesign a sensor to suit your specific requirement.
Standard options are available as below:

 

Measurement range:

Factory set to Any angle from ±7.5° to ±80° in increments of 1°
For example, if your application requires 90° measurement
then Positek will manufacture the sensor specifically for this angular range.
The sensor will measure 90° however will still rotate through 360°.


Electronic Options:
Output Signal Supply Input
Option code
Standard
0.5V-4.5V dc ratiometric +5V dc nom. ± 0.5V
A
Buffered  
0.5V-4.5V dc +24V dc nom. + 9-28V
G
0.5-9.5V dc +24V dc nom. + 13-28V
C


Connector/Cable Options:

Option code
Connector, Axial, IP67, M8 4 pin
J
Cable, Axial Gland IP67
L
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require, up to a maximum of 15000cm.
Specified in cm after the L
e.g. L200 for 200cm cable from axial cable gland


Mounting Options:
Option code
Flanged housing
blank
Servo mount
P

<+/-0.1% FSO Linearity error (100° max)
Z650


 

Get Price


Back To Top

Home Page Quality | Products | Part Number Coding | Case Studies |

| Help Desk | Enquiries | Distributors | How to find us |

 

   


Company logo

 

Home

Products

Enquiries

How To Buy

Quality

Product Index

Support

ATEX logo

IECEx

iso 9001:2000 logo


  Positek Limited

L6 The Link   Andoversford Industrial Estate   Cheltenham   Glos GL54 4LB   UK
Tel: +44 (0) 1242820027   Fax: +44 (0)1242 820615   Email: Sales@Positek.com

Registered in England Number: 2746707 - VAT Registration Number: GB 618 0533 56